Vacuum Cleaners

How to Fix a Vacuum That Lost Suction

We’ve all seen ads for vacuum cleaners that lose suction. True, a vacuum cleaner without suction isn’t really good for housekeeping. The advertisements’ approach is to get you to purchase a new, more costly vacuum.

Today I want to help you fix your vacuum. I’ll go through the top five reasons a vacuum lacks suction, as well as to how to fix a vacuum that lost suction.

#1 The Height Is Incorrect

The first and most simple reason a vacuum won’t pick up items off the floor is that the vacuum’s height setting is too high for the kind of floor you’re vacuuming.

To lift or lower a vacuum, it normally has a small dial or lever. It could mean “bare floor” and then have numbers 1 through 5 written on it. The lowest setting on your vacuum is bare floor, which can be used on either tile, wood, or other hard flooring because it seals the vacuum to the floor and allows for the most suction strength.

The closest the dial or lever is to the bare floor setting, the lower your carpet. If your vacuum isn’t running, consider turning it down and the lowest level and see if that solves the problem.

#2 The Bag Is Overflowing

If the vacuum still won’t pick up on a lower environment, the next step is to see if the vacuum’s lack of suction is due to a full vacuum bag or collection canister.

Fortunately, determining the source of your vacuum’s bad output is easy. On the front of a bagless vacuum, as well as the vacuum bag of both upright and canister vacuums, there would be a fill line.

There’s no more space for the dirt and hair to accumulate if it’s above the fill line in any collecting spot.

The vacuum will begin to sound like it’s running, but it won’t be able to suck up the debris on the floor due to a lack of suction strength. Any vacuum suction issues can be resolved by merely emptying the collection canister or replacing the vacuum pack.

If that doesn’t work, you’ll need to inspect the hose. Here’s how to do it:

#3 The hose has been clogged.

If emptying the canister or replacing an over-full vacuum bag didn’t fix the problem, there may have been so much debris trying to get into the vacuum that it clogged the hoses leading to the bag or canister.

You might see a clog of hair if you cut the bag or canister and look into the hole where they stick to the vacuum. If that’s the case, get some tweezers and start picking hair bits out. You should even disconnect the hose from the vacuum and focus on it that way if it doesn’t feel like you’re having anything.

If you have a clog in the middle of the hose that you can’t handle with your fingertips or tweezers, I’ve discovered two methods for removing stubborn clogs.

The first step is to fully cut the hose, take it outside, grip the unclogged end firmly, and turn it as hard as you can. The centrifugal force would drag the clog to the hose’s edge, allowing you to remove it.

A long stick, such as a broom handle, is another way I’ve learned to unclog a vacuum hose. Begin carefully feeding the stick into the vacuum hose. When you reach the clog, start pushing it through the hose until it comes out the other end.

If you use one of these techniques, make sure to do so outdoors and have a trash can handy since the clog can normally emit a cloud of loose dust.

#4 The vacuum isn’t fully airtight

A pump, as the name implies, works by sucking up debris from the floor by forming a vacuum. It can’t pull the stuff up if air is leaving the machine

Whether the vacuum isn’t full of debris and the hoses aren’t clogged, the second most likely explanation for poor performance is that it isn’t airtight. A vacuum, as the name implies, works by sucking up debris and scraps from the floor and forming a vacuum.

It can’t bring the stuff into the bag or canister if air is leaving the device. Although this can seem to be a highly complex problem, the most common causes are simple errors that we make.

The first place to look is at the vacuum’s hose link. You could not have gotten the hose back into the base hole close enough if you took it out to use the connectors. Your vacuum won’t suck up anything from the floor if there’s a space for air to get through the closure.

Be sure all of the items are tightly fastened together. If all seems to be in order, double-check that the vacuum bag is safely secured to the vacuum. It’s possible that the vacuum bag fell off when you didn’t press it on hard enough after mounting it, resulting in no suction.

If you’re still having trouble, you should still use a little duct tape on the bag’s folds to keep it airtight.

#5 The Roller Is Obstructed

If the bag and hoses seem to be in decent working order, the final move is to turn the vacuum over to inspect the roller. If the carpet’s hair or wool is wound around the roller, it won’t be able to spin or brush over it, and it will struggle miserably at picking up dirt.

A sharp pair of scissors will quickly patch a clogged and furry-looking carpet roller. snip through the hair and gunk a little at a time, starting at one end of the roller. When you cut, start dragging the furry mess away from you and dumping it in the garbage. When you’re done, turn the vacuum over and see if it works well on the other side.

If your vacuum is still not running at this stage, you may want to take it to a vacuum repair store. Find out how your make and model are serviced by local repair shops by calling around. Vacuum replacements are mostly cheap, but if you have a more serious issue, it might be more cost-effective to buy a new vacuum.

Before you lug it down to the store, the person on the other end of the line may be able to do some diagnosis over the phone. They can advise you to miss the repairs and buy a new vacuum instead, based on your vacuum and the symptoms it has.

Vacuum Cleaners

Why Does My Vacuum Smell Burnt?

Vacuums collect debris in our homes, keeping them clean and new. Your home can become significantly less pleasant if you detect an odd burning smell coming from your vacuum when it is in operation. But why does my vacuum smell burnt?

The burning odor may be caused by a variety of issues, some severe and some mild. To safeguard your hoover and yourself, immediate action should be taken to identify the source of the problem and fix it.

Problems with the Belt

A broken vacuum belt is the most common source of a burning odor from a Hoover or some other vacuum. As the unit works, the belt runs through the vacuum, causing the brush to spin in the vacuum.

Normal wear and tear, being trapped on the brush (if the brush is stuck or not spinning properly), or falling off track can all cause damage to the belt. Heat blistering, tearing, or stretching of the belt can all result in a sudden burning odor that smells like burnt rubber. To fix the issue, the belt must be replaced.

To get a new belt, go to a Hoover store or call the company with the make and model number of your vacuum. Fix the belt according to the directions in your owner’s manual, or hire a Hoover repair service to do it for you.

Burn-Out Motor

Your vacuum’s motor can simply stop working and burn out on occasion. This can happen for a variety of reasons, but the most popular are excessive vacuuming or just using an old vacuum with a worn-out motor.

This issue emits an odor that is similar to burning wires or molten plastic. Your motor should be replaced by a reputable vacuum repair company or a Hoover care professional. Occasionally, the engine does not fully burn out, but instead overheats for a few moments before cooling down.

A Filthy Motor

Your vacuum’s job is to search for and collect dust in the building. As a result, whether your vacuum is old or new, the motor can accumulate dust over time.

This may also be caused by a clogged filter. Dust accumulation is normal and usually does not pose a problem. If the dust builds up too much, the motor can emit a burning odor as it burns it off. Normally, a burning odor isn’t a cause for alarm.

The scent should go away until the dust has finally burned out of the motor chamber. If the odor persists, contact a Hoover repair expert to decide your vacuum’s next course of action.

Other Issues

Your vacuum can sometimes emit a burning odor that is unrelated to any of the problems mentioned above (in terms of odor or symptoms). Contact an approved vacuum repair center if this happens. It’s possible that the problem is too difficult for you to fix on your own, and that continuing to use your vacuum under these conditions is risky.

Taking your vacuum to a repair professional helps him to give it a thorough “check-up” and identify the source of the problem, as well as any other issues with the unit.

Vacuum Cleaners

How Often Should You Clean Your Vacuum?

Every now and again, the vacuum needs some tender loving care. And it’s no surprise: it’ll filter through a lot of mud, lint, and other dirt over the course of its existence.

If the vacuum isn’t cleaned thoroughly every now and then, much as plaque hardens on teeth, a forest of particulates can form. If you don’t take care of this buildup, it will put more strain on your vacuum’s motor and belt, eventually wearing them out.

Cleaning the vacuum can be compared to taking it to the hospital for a routine checkup. So how often should you clean your vacuum?

First and foremost, read your vacuum’s owner manual; it will provide you with basic details about how to maintain your model. However, you can clean your vacuum every 12 to 18 months as a general rule of thumb. Also, although it’s tempting to let your vacuum’s contents fill to capacity, it’s just as necessary to empty it often if you want long-term optimum efficiency.

In reality, the vacuum’s output is approximately proportional to how complete it is at the time of use. When the vacuum approaches half to two-thirds of its full power, it’s a smart idea to clean it. This will extend the life of your vacuum cleaner.

Let’s get into the detail now…

Why Do You Need To Clean Your Vacuum Every 12 To 18 Months?

When you clean your vacuum, you’re tackling the impact that dust, debris, and lint buildup have on the bearing housing of your vacuum.

It’s not necessary to go through technical specifics about the bearing housing; suffice it to assume that it’s placed on the vacuum’s underside and keeps oil from escaping through the shaft.

If there is an oil spill, the temperature will rise, releasing dangerous oil vapours – the worst-case scenario is the vacuum on fire or even burning!

An inefficient bearing device may slow down and soften the brush rolls – in other words, they may become less capable, and you will see this in their decreased capacity to pick up particles from surfaces by using that function.

When the vacuum is cleaning, soft brush rolls can seem to make contact with the floor board, but they never do until they become soft! Soft brush rolls will reduce the total efficacy of your vacuum by half, so they should be replaced.

Needless to mention, if wasteful service is allowed to continue for a long time, it would cost you the price of a new vacuum – alternatively, cleaning and repairing defective parts every 12-18 months will save you money.

Vacuum Cleaners Without Bags

If you have a vacuum cleaner without a bag, you will need to clean the filter(s):

– Once a week if you clean every day

– And, whether you sweep once or twice a week, once or twice a month.

The above is particularly important for bagless cleaners in order to maintain the equipment in excellent working order.

It’s worth noting that bagless vacuums are usually much more effective than bagged models; however, bagless models’ filters would need to be washed more often as a result. A few models use disposable filters rather than washable filters, which last 6 to 12 months.

What Are The Signs That It’s Time To Clean My Vacuum?

If you’ve experienced a decrease in efficiency – for example, you have to keep running over the same spot – it’s an obvious visual test that it’s time to clean your vacuum.

However, you should put it to the test on a carpet. When a vacuum cleaner is working well, the air suction should raise the carpet nap, or fibres, onto the brush roll. When you brush through the carpet, it can seem to stand up rather than be smooth, which is something that will happen if it is often trodden on.

Vacuums induce this transition by manipulating airflow with their brush roll in such a way that the carpet nap stands correctly, allowing dirt stuck between it to be properly pulled out. If this should not happen, it means either the carpet or the cleaner is dying.

How to Keep The Vacuum Tidy

The simplest solution is to locate your nearest vacuum specialist servicer, who can determine and replace the correct parts to maintain your vacuum in top working order.

If you have a little more time and grit, you can save even more money by reading the owner’s manual for your vacuum (which should be available online if you’ve forgotten or thrown away the original).

The following suggestions will vary depending on the sort of vacuum you have (for example, if it’s bagless, in which case certain modern models are much easier to clean and recondition). Filter vacuums with no bags are the trend on the market, and you’ll probably need something like:

A dust cloth and a screwdriver are included in the compressed air canister.

Dish cleaner – for a thorough soaking of all washable parts

If the filter is older than a year or 18 months, it has to be replaced.

Notice that many modern vacuums come with lifetime filters, which can last the life of the vacuum if not broken or worn out; most versions come with replacement filters.

When washing the filter, tap it on a rough surface to dislodge any hardened grit or debris that has built up on its surface. Be sure you don’t use your vacuum for a couple hours so you’ll need to let the cleaned pieces dry completely before reassembling them (to prevent electrocution!). Never attempt to speed up the drying process by placing pieces on a hot surface.

That’s what there is to it. Check your manual, but cleaning your total vacuum should be done every 12-18 months. Clean the filter on bagless models once a day or once a week, depending on how much you use it. As a matter of tradition, drain the vacuum until it exceeds half or two-thirds full. Your cleaner would appreciate it.

Vacuum Cleaners

Is It Worth to Buy Expensive Vacuum Cleaners?

Vacuum cleaners are priced differently, with some being more affordable than others. In terms of options, you are spoiled for choice.

Cheaper vacuum cleaners start at less than $100, while more expensive ones start at $300.

So, is it worth to buy expensive vacuum cleaners or should you go for a cheap one?

Is there much of a distinction between them?

More Thorough Cleaning

Those who have used both agree that the more expensive vacuum cleaners tend to remove more dust and debris (not always) and maintain your carpets clean, enabling them to last slightly longer.

As a result, you have a cleaner house with less effort. Furthermore, if you have any technical or other problems with the machine, the company normally provides better support and service.

Filters for Eliminating Allergens

If you have allergies, asthma, or other respiratory issues, you can use a vacuum cleaner with a HEPA filter. HEPA is an abbreviation for High Efficiency Particulate Air, and it is excellent for removing mold, smoke, and dust from the air. Many cleaners can do this, but the more costly ones have the added advantage of being able to remove 99.97 percent of allergens. If you really need an allergy-free area, the extra cost should be worth it to you.


The key distinction between expensive and less expensive vacuum cleaners is the simplicity with which they can be used, as well as their specifications. Cheaper vacuums seem to leave more debris behind on the first pass, so you will have to sweep the same area several times until it’s clear. Changing and attaching accessories such as brushes and bags often takes more time for inexpensive machines, making the jobs seem more difficult than they are.

The Real Cost of a Cheap Vacuum Cleaner

Many of the less expensive vacuums are often known to overheat and shut down unexpectedly. There have been instances where it has abruptly ceased to function for no apparent reason. Since you use it to scrub floors and carpets, it must be made of a sturdy material that can withstand the ordinary bumps and shakes. As a consequence, some of the pieces can become easily broken. Instead of being washed, your expensive carpet will be ruined, which is most likely not what you want.

Pick What Is Best For You

The most expensive vacuums on the market often come in a variety of price ranges, with some costing more and some costing less. The price disparity is mostly due to the inclusion or absence of accessories and additional attachments. When making your choice, consider whether you really need the extra brush or attachment. If you’re not intending to use one of the features, you can save a ton of cash by opting for a less costly model that lacks it.

Conclusion: Is It Worth to Buy Expensive Vacuum Cleaners?

Most of the time, the saying “you get what you pay for” is right. More costly vacuum cleaners have been linked to:

  • Dirt removal is simplified
  • Improved maneuverability
  • Better customer support
  • The ability to eliminate tiny particles from the air, such as allergens
  • Increased longevity

I personally use this vacuum and I absolutely love it!

While more costly vacuums are generally superior to their less expensive counterparts, this is not always the truth. There are several vacuums that are inexpensive but surpass many of the more costly ones.

Cost does not necessarily indicate the reliability of what you are buying, and it can only be used as a guideline. Regardless of how much or how little you plan to spend on a new vacuum, reading feedback will almost certainly ensure that you get more bang for the buck.