Categories
Hard Flooring

Is It Better to Vacuum or Sweep Hardwood Floors?

You take your broom and clean your gorgeous hardwood floors to keep them tidy. However, no matter how well you clean the floor, some dust and dirt still manages to escape. Then you grab your vacuum…

It’s not as outlandish as it might be. Vacuuming, rather than sweeping or using a dry mop, will get the hardwood floor cleaner if done correctly.

Is It Better to Vacuum or Sweep Hardwood Floors?

Dust mops and brooms work by sweeping dust and dirt around on the floor and into a dustpan. It’s not rocket science, but it’s also not the most efficient way to clean the floors of dirt and gravel.

Any dust becomes airborne as you vacuum, while other pieces of debris slip into crevices and corners. If you mop after sweeping, the moisture will stick to the dirt left behind and turn into mud. Which is why, when mopping a floor with a wet mop, the water seems dirty or cloudy after a few swipes.

A cleaner, on the other hand, suctions particles from crevices into a self-contained canister, resulting in less dispersed dust and less dust on the surface in general.

But hold on! Any vacuum would not suffice.

Hardwood Vacuums That Are Safe

You wouldn’t scrub wood floors with a bucket of water and a sopping wet mop, and you shouldn’t clean them with a regular vacuum cleaner either.

Most of them have a beater bar that practically pounds the carpets and stirs up dust and dirt. You risk scratching the hardwood floor’s finish and losing the luster if you use one with a beater bar.

For others, the beater brush may be turned off or removed entirely. Since they normally don’t have a beater bar, a stick vacuum made for bare floors or a canister vacuum are a safer option. Stick vacs have become common because they clean bare floors better than a broom or wet Swiffer-style mops.

You’ll want to make sure your vacuum has plenty of suction power. Many vacuums made for wood flooring provide incredible suction, and some are also sold for use on both carpets and bare floors. However, great suction isn’t as efficient on carpets without some form of irritation.

How Often Can Hardwood Be Vacuumed?

When you have cats, you can use that as much as you will a broom, which is every couple of days.

Then, once a week (or more if necessary), clean any stains that your vacuum couldn’t get rid of with a wet mop. If you follow these steps, your wood floor will look brand new for decades with little effort.

Categories
Hard Flooring

How to Clean Tile Floors Quickly and Effectively

Since floors are always the last item on a room’s to-clean list, you can hurry through the process in your effort to complete it. However, you can work quickly without leaving mud and waste behind. Do you ever wonder how to clean tile floors the right way?To clean tile floors quickly and effectively, simply follow these five steps

1. Take out all of the floor rugs and mats.

Take all floor coverings outside and shake them thoroughly. Return inside after placing them on a clean surface.

2. Sweep and vacuum the floor

For slipping into corners and crevices, nothing beats a broom. Sweep the floor in segments, piling as you go. Remove the beater bar from your vacuum and set it to the bare-floor level to avoid dulling and scratching the tile. After vacuuming the piles, use the appliance to carpet the whole floor. Attachments should be used to remove sticky particles from grout lines. Sweeping and vacuuming together removes the most dirt.

3. Prepare the Cleaning Solution

The kind of tile you have determines how you scrub it. A mild detergent recommended by the maker is suitable for ceramic tile. Abrasive cleaners can scratch the floor, as can chlorine or ammonia-based cleaners, and can discolor the grout. Follow the manufacturer’s guidelines for cleaning natural stone tile, which would most likely call for a soap-based substance. Abrasive cleaners can scratch the floor, as can chlorine or ammonia-based cleaners, and can discolor the grout. Lemon extract, vinegar, or other acids should not be used on granite, shale, or travertine.

To handle sticky stains, mix the cleaning agent according to the manufacturer’s instructions and keep a soft brush handy.

4. Wash the Floors

After soaking your chamois mop in the cleaning solution, ring it out until it’s just damp. Begin mopping at one end of the room and work your way backward, adjusting the water as required. Remove any stains with the soft brush. Rinse the floor with warm water until it appears clean to prevent detergent or soap residue from dulling the tile. Allow to air dry or wipe clean with a soft cloth.

5. Replace Rugs and Mats

Rugs and mats are important for maintaining tile floors as clean as possible, minimizing the amount of time spent washing, vacuuming, and mopping. Dirt and debris are drawn from shoes by floor coverings at access stages, both inside and outside the building. Kitchen and bathroom mats will catch a variety of things that fall to the floor. Be sure to clean the rugs and mats before returning them to their correct locations.

Pro tip: When it comes to removing hair and other debris from rugs, particularly those with a flat pattern, a big lint roller, the kind that looks like paint rollers, works wonders.

Additional Tips on How to Clean Tile Floors

  • When family members and visitors approach your house, ask them to take their shoes off.
    Between cleanings, dust mop to speed up the operation even further.
  • Frequently clean high-traffic areas.
  • Spills should be cleaned up as quickly as possible; even sealed tile and grout will stain if spills are left unattended.
  • To cover the tiles, reseal the tile and grout as directed.

If you ever think that cleaning your tile needs more time than you have or want to expend cleaning, consider hiring a specialist. That way, you can be certain that the proper products and techniques are being used every time, and you can rely on more enjoyable tasks.